Tools
Note: 3D printers are currently available for limited use. All prints must be made using PLA filament unless directed otherwise. Filament materials are available free of charge.
Keysight N9914A FieldFox RF Analyzer
Checkout Tool available in for checkout from 1003CRF Analyzer 6.5 GHz
Data Sheet
Calibration Guide
KeySight N2795A Active Probe
Checkout Tool available in for checkout from 1003C10:1, 1 GHz, 1 MOhm, 1.0 pF.
Max input: 20V peak
CAT I
Terminate with 50 ohm
User Guide
FLIR C2
Checkout Tool available in for checkout from 1003CCompact Professional Thermal Image Camera
User Guide
Fluke 27/FM Multimeter & 80K-6 High Voltage Probe
Checkout Tool available in for checkout from 1003C
Double-headed Cutter
Checkout Tool available in for checkout from 1003CYT-160A:
- Adjustable cutting heads
- Cuts any shape to 1/2″ radius
- Use with electric or pneumatic drill
- 1,500-3,000 RPM
Digital Fraction Caliper
Checkout Tool available in for checkout from 1003CAccuMASTER 7408:
- Resolution: 1/64″, .0005″, .01mm
Tacklife MDA01 Digital Angle Finder
Checkout Tool available in for checkout from 1003C- Durable stainless steel body can provide long time using
- By pressing the screw, the rulwers could be hold at any angles
- Etched measurement provides lifetime clear reading
- Automatically shut down after 6 minutes of inactivity
- Working more than 2000 hours with one piece of CR2032 coin battery
Fume Extractor
Soldering Tool available in in 1003AMust be used while soldering to reduce amount of harmful gases produced.
Desoldering Gun
Soldering Tool available in in 1003A- Temperature range 200-380°C (392-716°F)
- Suction Flow 15 L/min (max)
Soldering Iron
Soldering Tool available in in 1003ATemperature range 200-480°C (392-896°F) with fine tips options
Helping Hands
Soldering Tool available in in 1003ABoard holders as well as Alligator clamps with lighted magnifying glass
Aoyue Repairing System Int 2703A+
Soldering Tool available in in 1003AHot Air Gun (Left), De-solder Gun (Middle), Soldering Iron (Right)
Water and Isopropyl Alcohol Containers (Back)
Ultimaker 3 Extended
3D Printer available in 5- Build Volume: Left/Right Nozzle (single material): 21.5 x 21.5 x 30 cm [8.46 x 8.46 x 11.81 in] Dual Material: 19.7 x 21.5 x 30 cm [7.75 x 8.46 x 11.81 in]
- Layer Resolution: 20-600 micron
- Build Speed: up to 24 mm3/s
Ultimaker 2+
3D Printer available in 5- Build Volume: 22.3 x 22.3 x 20.5 cm [8.78 x 8.78 x 8.07 in]
- Layer Resolution: 600-20 micron
- Build Speed: Up to 24 mm3/s
- Build Plate Leveling
- Changing The Material and Nozzle